1979-1993 Mustang Hardware
Filters
1979-1998 Mustang or Cobra Hood Prop Rod Clip Holder Attachment
Daniel Carpenter Reproductions5.0 / 5.0
1 Review
•Brand New •Fits all 1979-1998 Mustangs •This item replaces the clip that holds your hood's prop rod firmly in place while you drive •Durable white...
View full details1979-1993 Mustang Door Hinge Pin Pins Kit w/ bushings Replace Hardware (8 pcs.)
Daniel Carpenter Reproductions•Brand New •Fits 1979-1993 Mustangs •Kit includes: -2 Door Hinge Pins -4 Hinge Bushings -2 Retaining Pins •This kit will complete one door •Replace...
View full details1987-1993 Ford Mustang Fuel Tank Sending Unit w/ O-Ring & Retaining Ring Float
Daniel Carpenter Reproductions•Brand New •Fits ALL 1987-1993 Mustangs •Exact reproduction of original, 100% perfect fit & finish •Stainless steel construction is corrosion p...
View full details1979-1993 Ford Mustang Coupe Convertible Trunk Hatch Lid Bumper Set
Daniel Carpenter ReproductionsThis hardware kit replaces your missing, worn, and torn trunk lid bumpers on 1979-1993 Mustang Coupes and Convertibles. The kit comes with two r...
View full details1979-1993 Ford Mustang Body Rubber Water Tight Seal Drain Plug Kit 30 pieces
Daniel Carpenter Reproductions•Brand New •Fits ANY 1979-1993 Mustang or Cobra. This kit replaces dried, broken, and missing body plugs. Reseals the access holes on all Fox-body ...
View full details1979-1993 Ford Mustang Injection Molded Nylon Door Latch Striker Bolt Bushing
Daniel Carpenter Reproductions•Brand New •Fits ANY 1979-1993 Ford Mustang •Sold individually •Durable injection molded nylon designed to take a beating
1982-1993 Mustang Upper & Lower Door Hinge Brackets, Tension Arms, Pin, & Roller
Daniel Carpenter Reproductions•Brand New, complete kit •Fits ANY 1982-1993 Mustang •Sold as a complete kit, includes both upper and lower hinges, 2 hinge pins, 4 bushings, one r...
View full details1983-1986 Ford Mustang Fuel Tank Sending Unit w/ O-Ring & Retaining Ring Float
Daniel Carpenter Reproductions•Brand New •Fits 1983-1986 Mustangs w/ Electronic Fuel Injection •Exact reproduction of original, 100% perfect fit & finish •Stainless steel st...
View full details1979-1998 Mustang Black Plastic Hood Lift Prop Rod Clip Holder Replacment
Daniel Carpenter Reproductions•Brand New •Fits all 1979-1998 Mustangs •This item replaces the clip that holds your hood's prop rod firmly in place while you drive •Durable plast...
View full details1986-1993 Mustang 5.0 V8 Engine Spark Plug Wire Holder Seperators - Set of 6
Daniel Carpenter Reproductions•Brand New •Fits 1986-1993 Mustang V8 •Exact reproduction of originals •Fits 8mm or 9mm spark plug wires •Mount on the valve covers to keep the wir...
View full details1979-1993 Mustang LX GT Hatchback Rear Window Glass Molding Retainer Clips 22 pc
Daniel Carpenter Reproductions5.0 / 5.0
1 Review
•Brand New •(22) Twenty-two Black Metal rear Hatch Window Molding Clips •These are the clips that your rear hatch window moldings attach to •Thi...
View full details1979-1993 Ford Mustang Gas Filler Door Bumper Cushion Stops Set (2 pcs.)
Daniel Carpenter ReproductionsThis hardware kit replaces the rubber bumpers that prevent the gas door from making metal-to-metal contact against the body of your Mustang. Kit ...
View full details1979-2004 Mustang or Cobra Steel Clutch Cable Bell Housing Retainer C Clip
Daniel Carpenter Reproductions•Brand new •100% like original, perfect fit & finish •Made from durable spring steel •This retainer clip slides into the groove of the clutch c...
View full details1982-1997 Ford Mustang Fuel Gas Tank Vapor Canister Purge Solenoid Valve & Rubber Seal
Daniel Carpenter Reproductions5.0 / 5.0
1 Review
•Brand New •Fits 1982-1997 Ford Mustang •Includes Vapor Valve & Vapor Valve Rubber Seal •Releases fuel vapor pressure from inside the fuel tank...
View full details1983-2004 Ford Mustang Front Upper Rubber Coil Spring Insulators Isolators Pair
Daniel Carpenter Reproductions•Brand New •Fits ANY 1983-2004 Ford Mustang or Cobra •Direct replacement, 100% like originals •Same rubber softness as originals to prevent metal f...
View full details1983-2004 Ford Mustang Front Lower Rubber Coil Spring Insulator Isolator
Daniel Carpenter Reproductions•Brand New •Fits ANY 1983-2004 Ford Mustang •Direct replacement, 100% like original •Same rubber softness as original to prevent metal fatigue that...
View full details1983-1993 Ford Mustang Cowl Vent Grille Grill Screws & Insert Nuts Hardware Set
Daniel Carpenter Reproductions•Brand New •Fits ALL 1987-1993 Ford Mustangs & Cobra's •This complete hardware kit attaches your cowl vent grille to your Mustang •10 Piece Kit...
View full details1979-1993 Mustang Cowl Rubber Seal Plugs (Outer Cowl/Under Hood)
Daniel Carpenter ReproductionsThis hardware kit replaces the rubber plugs that are located in the corners of the cowl panel where hood overlaps. Keep dirt and water out of the i...
View full details1987-1993 Mustang Manual 5 Speed Back Up Reverse Light Switch Wiring Harness
Daniel Carpenter Reproductions•Brand New •Fits 1987-1993 Ford Mustang or Cobra w/ 5-Speed Manual Transmission •Exact reproduction of original, 100% perfect fit & finish •Mea...
View full details1979-1998 Ford Mustang Wiring Harness Plug Connector Retainers - Set of 5
Daniel Carpenter Reproductions•Brand New •Fits ANY 1979-1998 Mustang •Sold as a set of 5 •These retainers are used on various wiring harnesses and connectors (Oxygen sensor harn...
View full details1979-1993 Ford Mustang or Cobra Windshield Wiper Arm Pivot Nut Cover Black
Daniel Carpenter Reproductions•Brand New •Fits ANY 1979-2004 Mustang or Cobra •Installs on the Driver's Side wiper for 1979-1993 Mustang, installs on the Passenger's Side wiper ...
View full details1979-2004 Ford Mustang or Cobra Spare Tire Hold Down Wing Nut & J Bolt Hardware
Daniel Carpenter Reproductions•Brand New •Fits ANY 1979-2004 Mustang •Includes Wing Nut & J Bolt used to secure spare tire •J bolt measures 4 3/4" long
1982-1993 Ford Mustang Upper & Lower Door Hinge Brackets w/ Pins & Bushings Kit
Daniel Carpenter Reproductions•Brand New •Fits ANY 1982-1993 Mustang •Sold as a kit, includes both upper and lower hinges, 2 hinge pins, & 4 bushings •Can be used on either ...
View full details1979-1993 Ford Mustang Rear Hatchback Hatch Trunk Door Swing Metal Hinge
Daniel Carpenter Reproductions•Brand New •Fits 1979-1993 Mustang Hatchbacks •Made from stainless steel that will not rust like originals did •Sold individually (2 Required Per C...
View full details1979-1998 Ford Mustang License Plate Light Socket Plug Pigtail w/ Wiring
Daniel Carpenter Reproductions•Brand New •Fits all 1979-1998 Mustangs or Cobras •Light socket uses 194 size bulbs •Comes with 10-inch wires for easy splicing •Allows installatio...
View full details1979-1993 Ford Mustang Door Glass Window Roller plastic Guide
Daniel Carpenter Reproductions•Brand New •Fits all 1979-1993 Mustangs •These are often cracked or old and cause the window to jam or rattle •One piece required per door •Sold In...
View full details1979-2004 Ford Mustang Fender to Hood Rubber Bumpers Cushion Stops 4pc
Daniel Carpenter Reproductions•Brand New •Fits ANY 1979-2004 Mustang or Cobra •Inserted into the fender to prevent the hood from damaging the fenders when it is opened and close...
View full details1987-1993 Ford Mustang Hatchback Rear Hatch Trunk Rubber Bumper Stops - 2pc
Daniel Carpenter Reproductions•Brand New •Fits ANY 1987-1993 Ford Mustang Hatchback •Sold as a Pair, includes Two (x2) Rubber Bumpers •This hardware replaces broken or missing r...
View full details1987-1993 Ford Mustang A/C Evaporator Engine Firewall Drain Seal Grommet
Daniel Carpenter Reproductions•Brand New •Fits ANY 1987-1993 Ford Mustang •Exact reproduction of original •Constructed from durable fire-resistant sponge rubber •Sold individually
1983-1993 Mustang Header Panel Support Brackets Polished Stainless Steel - Pair
Daniel Carpenter Reproductions•Brand New •Fits ANY 1983-1993 Ford Mustang or Cobra •Exact reproduction of originals, 100% perfect fit & finish •Stainless steel construction ...
View full details1983-1998 Ford Mustang Manual T5 T45 Speedometer Drive Gear Yellow 7 Tooth
Daniel Carpenter Reproductions•Brand New •Fits 1983-1998 Mustang & Cobra w/ T5 or T45 Transmission •7-Tooth Yellow Speedometer Drive Gear •100% like original, perfect fit &a...
View full details1979-2004 Ford Mustang Windshield Wiper Arm Pivot Linkage Bushing Repair Kit
Daniel Carpenter Reproductions•Brand New •Fits ANY 1979-2004 Mustang or Cobra •Includes Three (3) Plastic Bushings & Three (3) Grease Seals •Swap out your old bushings for t...
View full details1979-1993 Mustang Replacement Upper & Lower Body to Door Hinge Brackets - Pair
Daniel Carpenter Reproductions•Brand New •Fits ANY 1979-1993 Mustang •Sold as a pair, includes both upper and lower hinges, does one door •Can be used on either driver or passen...
View full details1979-1993 Ford Mustang GT LX Cobra Hatchback Rear Hatch Door Metal Hinges - Pair
Daniel Carpenter Reproductions•Brand New •Fits 1979-1993 Mustang Hatchback •Made from stainless steel that will not rust like originals did •Sold as a Pair (Enough to do one car...
View full details1987-1989 Mustang GT LX Steering Wheel Horn Button Spacer Pad Repair Fix Kit
Daniel Carpenter Reproductions•Brand New •Fits ANY 1987-1989 Mustang •Goes between horn button contact plate & steering wheel •Restore old horn buttons that make continuous ...
View full details1983-2004 Ford Mustang Rubber Front & Rear Upper Suspension Spring Insulators
Daniel Carpenter Reproductions•Brand New •Fits ANY 1983-2004 Ford Mustang •Sold as a 4pc Kit •Includes Two (x2) Front Upper Spring Insulators & Two (x2) Rear Upper Spring In...
View full details1979-1986 Ford Mustang Glovebox Door Cushions Stops Bumpers Plugs 2 pcs
Daniel Carpenter Reproductions•Brand New •Fits ANY 1979-1986 Mustang •Sold as a Pair •Replaces damaged or missing bumpers that fit into the glove box •These bumpers secure the g...
View full details1979-1986 Ford Mustang Hatchback Rear Hatch Trunk Rubber Bumper Stops - 2pc
Daniel Carpenter Reproductions•Brand New •Fits ANY 1979-1986 Ford Mustang Hatchback •Sold as a Pair, includes Two (x2) Rubber Bumpers •This hardware replaces broken or missing r...
View full details1981-1993 Ford Mustang Hardtop Door Window Glass Lower Rubber Stop Bumpers Pair
Daniel Carpenter Reproductions•Brand New •Fits ANY 1981-1993 Ford Mustang Hardtop (does not fit convertible) •Sold as a set of two (enough to do one car) •100% like original, ex...
View full details1979-1993 Ford Mustang Rear Trunk Hatch Lid Lock Foam Retainer Seal
Daniel Carpenter Reproductions•Brand New •Fits ANY 1979-1993 Mustang •Sold individually •Direct replacement, exact reproduction of original •Installs on the trunk/hatch lid betw...
View full details1982-1998 Ford Mustang Fuel Gas Tank Vapor Canister Purge Solenoid Valve
Daniel Carpenter Reproductions•Brand New •Fits 1982-1998 Ford Mustang •Releases fuel vapor pressure from inside the fuel tank •Plastic housing with metal threads •Exact reproduc...
View full details1979-93 Mustang Taillight Quarter Panel Rubber Water & Weather Seal Plugs 2pc.
Daniel Carpenter Reproductions•Brand New •Fits all 1979-1993 Mustangs •Replaces the two plugs located in the quarter panel behind your rear bumper cover •Keep dirt and water out...
View full details1989-2004 Ford Mustang Radiator Support to Hood Rubber Bumper Cushion Stop
Daniel Carpenter Reproductions•Brand New •Fits ANY 1989-2004 Mustang •Prevents damage to the radiator and hood when opening/closing •This item replaces the factory radiator bump...
View full details1983-1993 Ford Mustang Cowl Grille w/ Windshield Washer Nozzle & Install Screws
Daniel Carpenter Reproductions•Brand New •Fits any 1983-1993 Mustang •Fabricated with molded ABS Black Plastic •Includes Windshield Washer Nozzle & Installation Screw •...
View full details1979-1993 Ford Mustang Upper or Lower Body Door Hinge Bracket Hardware
Daniel Carpenter Reproductions•Brand New •Fits ANY 1979-1993 Mustang •Sold individually •Will work as upper or lower door hinge •Can be used on either driver or passenger side d...
View full details1986-1993 Mustang V8 12pc Engine Valve Cover Bolts Spark Plug Wire Holder Studs
Daniel Carpenter Reproductions•Brand New •Fits 1986-1993 Ford Mustang V8 5.0L •Includes 4 special made stud bolts that spark plug wire holders snap onto to keep plug wires from ...
View full details1979-1993 Mustang Speedometer Cable Firewall Rubber Grommet Manual Transmission
Daniel Carpenter Reproductions•Brand New •Fits ALL 1979-1993 Mustangs with manual transmissions •Seals off pass-through hole in firewall on Mustangs with manual transmissions
1981-1991 Mustang Hatch Back Interior Hatch Light / Open Warning Pressure Switch
Daniel Carpenter Reproductions•Brand New •Fits 1981-1991 (before 5/1991 only) Mustang hatchbacks •Mounts next to the hatch latch on the interior body •This is the pressure switc...
View full details