1979-1993 Mustang Hardware
Filters
1983-1993 Mustang Hood & Radiator Support Rubber Bumpers Kit Set of 6
Pony Enterprises5.0 / 5.0
1 Review
•Brand New •Fits 1983-1993 Mustang •This kit has everything you need to protect your fender & radiator from your hood's openings and closings ...
View full details1979-1993 Mustang Coupe Front & Rear Window Glass Metal Molding Retainer Clips
Pony EnterprisesThis hardware kit replaces the window molding clips on 79-93 Mustang Coupes. Replaces both front and rear window molding clips. Kit includes: 27...
View full details1979-1993 Mustang Lower Front Fender Extension Spat Hardware Studs & Nuts 4pc
Pony Enterprises2.0 / 5.0
1 Review
•Brand New •Fits ANY 1979-1993 Ford Mustang •Includes Two (x2) Studs & Two (x2) Nuts, enough to attach one extension •Studs measure 1.25" long
1979-1993 Ford Mustang Door Panel attaching Retaining Clips Push Pins 12 pieces
Pony Enterprises•Brand new •Fits ALL 1979-1993 Ford Mustangs and Cobras •Set of 12 (does one door panel) •This hardware kit replaces the retaining clips that hold ...
View full details1979-1993 Ford Logo Mustang Ignition & Trunk Key Blanks Set
Pony Enterprises•Brand New •For ANY 1979-1993 Mustang •Includes 2 Ford-brand keys, one blank ignition key & one blank trunk key •Each can be tailored to your M...
View full details79-93 Mustang Coupe Rear Window Bottom Molding Clips (5)
Pony EnterprisesThis hardware kit replaces the bottom molding clips on the rear windshield of 79-93 Coupes. These clips attach to the studs located in the space...
View full details1987-1993 Mustang GT Headlight fog light Switch Repair Plug Harness Connector
Pony Enterprises•Brand new •Fits ANY 1987-1993 Mustang GT & 1993 SVT Cobra (Does not fit Cobra R) •This is the connector that plugs into the back side of your...
View full details1979-1993 Ford Mustang Door Frame Lower Kick Panel Replacement Hardware Kit
Pony Enterprises•Brand New •Fits any 1979-1993 Mustang •Sold as an 8 piece kit •Does both Driver & Passenger side kick panels Kit Includes: Four 1-1/4" whit...
View full details1983-1993 Ford Mustang Door Lock Striker Bolt Plate Post Assembly E9AZ5422008A
Pony Enterprises•Brand New •Fits all 1983-1993 Ford Mustangs & Cobras •Replacement striker bolt for door lock striker bolt assemblies •Sold individually
1983-1993 Ford Mustang Hood Insulation Installation Plug Retainer Clips Set 14pc
Pony Enterprises5.0 / 5.0
1 Review
•Brand New •Fits all 1983-1993 Mustangs •This hardware kit replaces the retainers that hold the under-hood insulation to the underside of the hood ...
View full details1987-1993 Ford Mustang Headlight Switch Repair Harness Pigtail Wiring (w/o fog)
Pony EnterprisesThis hardware harness replaces a broken or worn headlight switch plug & pigtail. Plug is a rectangular 6-pin connector and the pigtail has eigh...
View full details1987-1993 Ford Mustang LX GT Hatchback INTERIOR Hardware Screws Kit 150 Pieces
Pony EnterprisesFits 1987-1993 Mustang hatchbacks Includes all screws to do entire interior 150 pieces Includes the following screw kits: •inside m...
View full details1979-1986 Mustang Exterior Outside Door Belt Molding Plastic Retainers & Nuts
Pony Enterprises•Brand New •Fits ANY 1979-1986 Mustang •Includes Seven (x7) Plastic Retainers & Seven (x7) Metal Nuts •Enough to do one door •Replaces your wor...
View full details1987-1993 Ford Mustang Rear Bumper Cover Hardware Flange Nuts - Set of 10
Pony Enterprises•Brand New •For 1987-1993 Mustang GT, LX & Cobra •Includes 10 Flange Nuts •These are the nuts used to secure the rear bumper to the body of the...
View full details1983-1993 Ford Mustang Cowl Vent Grill Grille Retainer Nuts Attaching Hardware
Pony EnterprisesThese retainers push into the sheet metal of the cowl and allows the screws to attach the cowl to the body. Four retainers are necessary for the si...
View full details1979-93 Mustang Radiator Air Dam Deflector Mounting Kit - Bolts, Clips & Washers
Pony EnterprisesThis hardware kit mounts the air dam deflector onto the bottom of the radiator on your 1979-1993 Mustang. The air deflector pulls air up to cool th...
View full details1979-1993 Ford Mustang Coupe 19pc Rear Window Molding Clips Retainers Hardware
Pony Enterprises•Brand New •Fits ANY 1979-1993 Ford Mustang Coupe •Attaches to the studs located in the space between the body of the car and the rear window glass...
View full details1979-1986 Ford Mustang Exterior Outside Door Belt Molding Plastic Retainers
Pony Enterprises•Brand New •Fits 1979-1980 Mustang •Replaces the door molding retainers on 1979-1980 Mustangs. Mounting to the top of the door, this item comes wit...
View full details1979-04 Ford Mustang Wiring Harness Plug Retainer Hardware Clips (Tape On)
Pony Enterprises•Brand New •This is a hardware kit that is used in multiple places in your Mustang. •These retainers secure many wiring harnesses, and tape must be...
View full details1979-1982 Mustang Fender Radiator Hood Bumpers Kit 6 pcs
Pony EnterprisesThis hardware kit has everything you need to protect your fender & radiator from your hood's openings and closings on 1979-1982 Mustangs. ...
View full details1987-1993 Ford Mustang Door Panel Side Speaker Grille Screws - 2pc Hardware
Pony Enterprises•Brand New •For use on any fox body 1987-1993 Mustang •Includes two 1-1/2" phillips head screws •Attaches the speaker grille panel to the body of t...
View full details1979-1986 Ford Mustang Plastic Headlight Adjust Bearings Hardware - 8pc
Pony Enterprises•Brand New •For 1979-1986 Ford Mustang (Does not fit SVO) •Sold as an 8pc set •Enough to do one car
1983-2004 Ford Mustang 1/2" Clutch Fork Cover Screw Hardware
Pony Enterprises•Brand New •Fits ANY 1983-2004 Ford Mustang or Cobra •Thread measures 1/2" long & 1/4" wide •Secures the clutch fork cover
1979-1982 Ford Mustang Hood Scoop Attaching Mounting Hardware Kit
Pony Enterprises•Brand New •Fits ANY 1979-1982 Mustang •This hardware kit securely attaches the hood scoop to the hood •Includes Six (6) Studs & Six (6) Washer...
View full details1979-1993 Ford Mustang Hardtop Headliner Push In Retainer Fasteners 4pc
Pony Enterprises•Brand New •Fits ANY 1979-1993 Mustang hardtop •Not intended for convertibles •Sold as a set of 4 (enough to do one car) •Holds headliner in place ...
View full detailsFord Mustang Fox Body Ignition to Steering Column Switch Screw Kit
Pony Enterprises5.0 / 5.0
1 Review
•Brand New •Fits ANY 1979-1993 Mustang •Attaches the ignition switch to the steering column (It's strongly recommend to apply a thread locker bef...
View full details1979-93 Ford Mustang Fuel & Brake Screws - Fastens Clips that Install Lines
Pony EnterprisesThis hardware fastens the clips that track your fuel and brake lines on your 79-93 Mustang! Kit includes six 3/4" long hex-head screws.
1986-93 Mustang Fuel Line O-Rings Seal Kit 4 pcs
Pony EnterprisesThis O-ring set installs into your fuel line to ensure a proper seal in your 86-93 Mustang. This kit includes four O-rings of two different siz...
View full details1990-1993 Mustang Front Parking Turn Signal Light 3157A Socket Pigtail Connector
Pony EnterprisesThis hardware installs the socket that your Parking/Turn signal light bulb will plug into. Rear of socket has three 5-6" long wires for easy splici...
View full details1979-1993 Ford Mustang Floor Pan Under Seat Rubber Grommet Plugs Set of 4
Pony Enterprises•Brand New •Fits ANY 1979-1993 Mustang •These plugs repair & replace the seals that are located on the left and right sides of the floor pan un...
View full details1987-1993 Mustang Headlight Parking & Turn Signal Mounting Hardware Nuts 14pc
Pony Enterprises•Brand New •Fits ANY 1987-1993 Mustang •Includes 14 keps nuts (nuts w/ free spinning washer attached) •Does both driver and passenger side •Nuts me...
View full details79-93 Mustang Door Hinge and Oversize Bushings Repair Kit (Does 1 Hinge, 5 pcs)
Pony EnterprisesThis hardware kit repairs your 1979-1993 Mustang's door hinge. Kit includes: One 3-1/2" Stainless Steel hinge pin Two oversize bronze bushings...
View full details1983-1993 Ford Mustang LX GT Taillight Housing Attaching Nuts Set Hardware12 pcs
Pony Enterprises•Brand New •Fits ALL 1983-1993 Ford Mustangs and Cobras •Set of 12 hex nuts •One set does both Taillight Housings. •Nuts come with attached washers...
View full details1979-1993 Mustang Side Door Kick Panel Retainer Plug Replacement Hardware
Pony Enterprises•Brand New •Fits any 1979-1993 Mustang •Sold individually •This is the plastic pin that connects your driver's side kick panel to the door frame •C...
View full details1979-1993 Mustang Lower Shift Shifter Boot Mounting Hardware Clip Nuts Bolts Kit
Pony Enterprises•Brand new •Fits 1979-1993 Mustang •Hardware to attach the lower shift boot to the transmission tunnel • oxide coated for corrosion resistance •Inc...
View full details1987-1993 Ford Mustang Door Armrest Pad to Frame Hardware Set, Nuts & Screws
Pony EnterprisesThis screw & nut set attaches the door armrest to the door frame on 1987-1993 Mustangs. This complete hardware kit installs one armrest, two ...
View full details1979-1982 Ford Mustang Rear Taillight Light Bulb Socket with Wiring
Pony Enterprises•Brand New •Fits all 1979-1982 Mustangs •This taillight socket replaces a faulty socket on 1979-1982 Mustangs •Rear of socket attaches three 5" ...
View full details1986-1993 Ford Mustang Battery Hold-Down Bolt w/ Washer
Pony Enterprises•Brand New •Fits 1986-1993 Mustang •Replaces the bolt that assists in keeping the battery secure in your 1986-1993 Mustang •Includes one 2-1/4" hex...
View full details1986-1993 Mustang Battery Tray Anchor Mounting Bolts, Washers & Clip Kit
Pony EnterprisesThis kit replaces the hardware that attaches your battery tray to your inner fender. Kit includes: Two 1" hex-head bolts w/ washers One 2-1/4" ...
View full details1979-1993 Mustang Door Lock Actuator Rivet Hardware inner door frame
Pony EnterprisesThis rivet affixes the door lock actuator to the inner door frame. Set includes one 2-1/8" rivet with reverse-beveled washer.
1979-1993 Mustang & Cobra Hatchback Front Rear Window Molding Clips Set of 35pcs
Pony Enterprises•Brand New •Fits ALL 1979-1993 Ford Mustangs & Cobra Hatchbacks •Includes Clips for the Front Windshield Moldings and Hatchback Rear Glass Mold...
View full details1979-2004 Ford Mustang Stainless Steel License Plate Clips & Screws Kit
Pony EnterprisesThis hardware kit contains the items necessary to install the front and rear license plates on your 1979-2004 Mustang. Kit includes: Four ...
View full details1979-93 Ford Mustang Rear Bumper Cover Push In Plug Retainers 6pc.
Pony EnterprisesThis hardware kit contains the retainers that attach your rear bumper cover to your Mustang's body. Kit includes six plastic retainers with Chri...
View full details1979-93 Mustang Coupe Hatchback Windshield Molding Retainer Hardware Clips 13pc
Pony EnterprisesMetallic clips that fasten and hold the front windshield moldings on 1979-1993 Mustang coupes & hatchbacks. They are an exact fit to the factor...
View full details1979-1993 Mustang Door Latch Rod End Retaining Clip
Pony Enterprises•Brand New •Fits all 1979-1993 Mustangs •Attaches your door rod assemblies to the latch •Item is fragile, so extra care must be taken during instal...
View full details1979-1982 Mustang Tail Light Housing Retaining Hex Nuts w/ Washers - 12 pcs
Pony Enterprises•Brand New •Fits 1979-1982 Mustang •This hardware kit will fasten and secure both left and right taillight housings! Set includes: Twelve hex...
View full details1986-1993 Ford Mustang TFI Module Repair Harness Pigtail Wiring Plug Connector
Pony EnterprisesTFI Module Repair Harness for 1986-1993 Mustangs. Replace your worn and cracked harness! This repair plug & pigtail fits into the connector ...
View full details1990-1993 Mustang Steering Column Cover Screws Pair
Pony Enterprises5.0 / 5.0
1 Review
•Brand New •Fits all 1990-1993 Mustangs •Two (2) 1.5" phillips-head screws (two required per car) •Screws are black •Replaces worn, stripped, or m...
View full details