Daniel Carpenter Restoration Parts
Filters
1987-1993 Ford Mustang GT Door Body Side Trim Moldings Mouldings - Pair LH RH
Daniel Carpenter Reproductions5.0 / 5.0
1 Review
•Brand New •Made by Daniel Carpenter Reproductions •Sold as a Pair Left and right hand outer door moldings •Fits 1987-1993 Mustang GTs or Cobras •B...
View full details1987-1993 Ford Mustang Center Console Power Side Mirror Switch Control * NEW *
Daniel Carpenter Reproductions•Brand New •Fits ANY 1987-1993 Ford Mustang or Cobra •Made from the original Ford tooling so it is an exact reproduction of the original •The cente...
View full details1987-1993 Fox Body Ford Mustang LX 5.0 Front Rear Fender Bumper Emblems Set
Daniel Carpenter ReproductionsIncludes: •2 Chrome 5.0 emblems •1 LX rear trunk emblem •1 Ford Front bumper emblem •1 Ford rear deck lid emblem •Front bumper and rear deck lid em...
View full details1979-1993 Mustang Door Hinge Pin Pins Kit w/ bushings Replace Hardware (8 pcs.)
Daniel Carpenter Reproductions•Brand New •Fits 1979-1993 Mustangs •Kit includes: -2 Door Hinge Pins -4 Hinge Bushings -2 Retaining Pins •This kit will complete one door •Replace...
View full details1993 Mustang Cobra Heater Tube Assembly Without EGR Coolant Connector
Daniel Carpenter Reproductions5.0 / 5.0
1 Review
•Brand New •For 1993 Mustang Cobra •Also fits 1986-1993 Mustang when EGR coolant connector is not needed •100% like original, perfect fit & fin...
View full details1987-1993 Ford Mustang LX - Stock Complete Taillights w/ Housings & Seals LH RH
Daniel Carpenter Reproductions•Brand New •Made from the Original Ford Tooling in the USA! •These Taillights are Original for 1987-1993 Mustang LX •Fits ANY 1983-1993 Ford Mustan...
View full details1982-1993 Mustang Upper & Lower Door Hinge Brackets, Tension Arms, Pin, & Roller
Daniel Carpenter Reproductions•Brand New, complete kit •Fits ANY 1982-1993 Mustang •Sold as a complete kit, includes both upper and lower hinges, 2 hinge pins, 4 bushings, one r...
View full details1983-1986 Ford Mustang Fuel Tank Sending Unit w/ O-Ring & Retaining Ring Float
Daniel Carpenter Reproductions•Brand New •Fits 1983-1986 Mustangs w/ Electronic Fuel Injection •Exact reproduction of original, 100% perfect fit & finish •Stainless steel st...
View full details1987-1993 Ford Mustang LX 5pc Black Grille Fender Trunk Emblem Set
Daniel Carpenter Reproductions5.0 / 5.0
1 Review
•Brand New! Just released - All Black Emblems for your tricked out Mustang!•Officially Ford Licensed Products•High Quality Emblems made by Daniel C...
View full details1993-1997 Ford Ranger XLT STX 4.75" Glass Fog Light Lamps Lenses w H3 Bulbs Pair
Daniel Carpenter Reproductions•Brand New •Fits 1993-1997 Ford Ranger XLT & STX Pickups with factory Fog lights •Sold as a Pair, includes Two (x2) Fog Lights •Direct replacem...
View full details1994-2004 Mustang & Cobra Convertible BLACK Door Switch Panel Inserts Housings
Daniel Carpenter Reproductions5.0 / 5.0
1 Review
•Brand New •100% like Original •Fits ANY 1994-2004 Ford Mustang or Cobra Convertible w/ Power Windows •Sold as a kit, includes housings for both th...
View full details1994-1998 Mustang Black Shifter Trim Bezel & Leather Shift Boot
Daniel Carpenter Reproductions•Brand New •Fits ANY 1994-1998 Mustang w/ Manual Transmission •Includes Shifter Bezel & Leather Shift Boot Shift Bezel •Includes 8 push nut r...
View full details1986-2004 Mustang Muffler Tailpipe Exhaust Hanger Rubber Insulators - Pair
Daniel Carpenter Reproductions•Brand New •Fits any 1986-2004 V8 Mustang or Cobra •Sold as a pair •Replace those old dry rotted exhaust hangers with these brand new ones •1986-19...
View full details1985-1986 Mustang LX 10 Piece Body, Front, Quarter, Side Moldings Mouldings Kit
Daniel Carpenter Reproductions•Brand New •Fits 1985-1986 Mustang LX •High quality reproductions - exactly like original! •6 pieces use high quality molding tape to install; 4 p...
View full details1987-1993 Ford Mustang Coupe Quarter Windows Glass & Moldings LH RH w/ Hardware
Daniel Carpenter Reproductions5.0 / 5.0
1 Review
•Brand New•Officially licensed by Ford, made by Daniel Carpenter Reproductions•Fits 1987-1993 Ford Mustang Coupe/Notchback•100% direct replacements...
View full details1979-1993 Mustang Upper & Lower Radiator Bracket Rubber Insulators 4 piece set
Daniel Carpenter Reproductions4.0 / 5.0
1 Review
•Brand New •Fits ALL1979-1993 Mustangs with factory style 2 Row Radiator •Perfect for restoration or squeaks •EPDM rubber for high temp application...
View full details1983-1998 Mustang 4.10 3.73 White 23 Tooth Speedometer Speedo Gear
Daniel Carpenter Reproductions5.0 / 5.0
1 Review
•Brand New •23-tooth •This is a must when switching to 3.73 or 4.10 gears or when buying one of our Genuine Ford Racing Ring and Pinion Gear sets t...
View full details1999-2004 Ford Mustang Seat Release Lever Tilt Knob Latch Handle Black
Daniel Carpenter Reproductions5.0 / 5.0
1 Review
•Brand New•Fits ANY 1999-2004 Ford Mustang or Cobra•Direct replacement for factory seat latch•Comes in black•Sold individually, works on either Dri...
View full details1994-2004 Ford Mustang Convertible Quarter Pillar Post Rubber Weatherstrip Seals
Daniel Carpenter Reproductions5.0 / 5.0
1 Review
•Brand New •Fits 1994-2004 Ford Mustang & Cobra Convertibles •Includes the special four (4) push in fasteners •100% like originals •Sold as a P...
View full details1987-1993 Mustang GT Euro Clear Complete Fog Lights Lamps w/ H3 Bulbs - Pair
Daniel Carpenter Reproductions•Brand New •Complete euro ultra clear fog light assemblies w/ correct bracket, plug, & bulb - pair (both driver's and passenger's side) •Fits 1...
View full details1999-2004 Ford Mustang Center Console Arm Rest Trim Cover Pad Charcoal Black
Daniel Carpenter Reproductions•Brand New •Fits ALL 1999-2004 Ford Mustang & Cobra (Note:Will not fit cars with recessed holder on console armrest, see photo above) •Comes in...
View full details1987-1993 Ford Mustang Positive Red Engine Battery Cable 13.5"
Daniel Carpenter Reproductions•Brand New •Fits ANY 1987-1993 Mustang •100% Exact reproduction of originals •Developed w/ new tooling to make them exactly like OEM •13 1/2" from ...
View full details1986-1998 Mustang 4.10 3.73 White 23 Tooth Speedometer Speedo Gear w/ Clip
Daniel Carpenter Reproductions5.0 / 5.0
1 Review
•Brand New •Includes 23 tooth white speedo gear & clip to hold wiring in place •A must when switching to 3.73 or 4.10 gears or when buying one ...
View full details1984-1986 Ford Mustang SVO 6pc Body Moulding Trim Kit - LH & RH
Daniel Carpenter Reproductions•Brand New •Fits 1984-1986 Ford Mustang SVO Kit Includes •LH Back of Fender Moulding •RH Back of Fender Moulding •LH Door Moulding •RH Door Mouldin...
View full details1987-1993 Mustang Battery Tray w/ Battery Hold-Down & Anchor Mounting Bolts Kit
Daniel Carpenter Reproductions•Brand New •Fits any 1987-1993 Mustang •Battery Hold-down and bolt included •Made of thick ABS plastic like original •Mounts to the front fende...
View full details1987-1993 Mustang Black Center Console Arm Rest Pad Cover & Trim Panel Base Kit
Daniel Carpenter Reproductions•Fits any 1987-1993 Mustang •Complete kit for the center console arm rest •Not painted, but made from color matched material for a long lasting f...
View full details1987-1993 Ford Mustang GT 5.0 4pc Black Grille Fender Trunk Emblem Set
Daniel Carpenter Reproductions•Brand New! Just released - All Black Emblems for your tricked out Mustang!•Officially Ford Licensed Products•High Quality Emblems made by Daniel C...
View full details1979-1993 Mustang Antenna Base & Cable Kit
Daniel Carpenter Reproductions•Brand New •Exact reproduction of the kit that was available from Ford before they became obsolete. •Includes base, pad and cable with the special ...
View full details1987-1993 Mustang 5 Speed Manual Black Real Leather Shifter Shift Boot & Bezel
Daniel Carpenter Reproductions•Brand New •Fits any 1987-1993 Mustang 5 Speed •Kit includes real leather shift boot & bezel •Both pieces are exact reproductions •Shift boot f...
View full details1987-1993 Ford Mustang Center Console Armrest Arm Rest Bottom Trim Panel Base
Daniel Carpenter Reproductions5.0 / 5.0
1 Review
•Brand New •Fits ALL 1987-1993 Mustangs •This is the base for the center console arm rest •Comes with attached rubber bumpers
1979-1993 Ford Mustang 5.0 Exterior Fender & Trunk Emblems in Black & Red - Pair
Daniel Carpenter Reproductions5.0 / 5.0
1 Review
•Brand New •Ford officially licensed product •Black with red decimal point, as shown •Adhesive backed for quick and easy installation •Measure 4.75...
View full details1979-1993 Ford Mustang Complete POLISHED Stainless Steel Hood Lift Hinges Pair - Factory 2nds
Daniel Carpenter Reproductions5.0 / 5.0
1 Review
Note: this listing is for a pair of factory second hood hinges, there are some minor cosmetic imperfections in the chrome plating as well as some s...
View full details1983-1986 Mustang Convertible Quarter Window Outer Belt Molding Weatherstrip Kit
Daniel Carpenter Reproductions•Brand New •Fits 1983-1986 Ford Mustang Convertible •All pieces are direct replacements with perfect fit & finish •Replaces your factory quarte...
View full details1984-1993 Ford Mustang & Cobra Interior Door Jamb Dome Light Switch w/ Boot
Daniel Carpenter Reproductions•Brand New •Fits ANY 1984-1993 Ford Mustang & Cobra •Kit includes dome light switch & rubber boot •Boot mounts between the switch and front...
View full details1987-1993 Ford Mustang 5 Speed Manual Console Black Shifter Shift Boot Bezel Kit
Daniel Carpenter Reproductions•Brand New •Fits any 1987-1993 Mustang with a 5 Speed Manual transmission •Kit includes Shift Boot & Bezel •Both pieces are 100% Exact Reproduc...
View full details1979-1993 Mustang Cowl Rubber Seal Plugs (Outer Cowl/Under Hood)
Daniel Carpenter ReproductionsThis hardware kit replaces the rubber plugs that are located in the corners of the cowl panel where hood overlaps. Keep dirt and water out of the i...
View full details1979-1998 Ford Mustang Wiring Harness Plug Connector Retainers - Set of 5
Daniel Carpenter Reproductions•Brand New •Fits ANY 1979-1998 Mustang •Sold as a set of 5 •These retainers are used on various wiring harnesses and connectors (Oxygen sensor harn...
View full details1979-1985 Ford Mustang Radiator Overflow & Washer Wiper Fluid Tank w/ Sensor
Daniel Carpenter Reproductions•Brand New •Fits ANY 1979-1985 Ford Mustang •Includes "Washer Fluid Only" cap tethered to lid •Includes pre-installed low fluid sensor •100% like o...
View full details1993-1995 Ford Mustang Cobra 5.0 Rubber Engine Distributor Cover Boot Cobra Logo
Daniel Carpenter Reproductions•Brand New •Fits 1986-1995 Ford Mustang & Cobra w/ V8 5.0L & 5.8L Engine •3D molded cobra snake logo on top •Durable rubber construction is...
View full details1994-2004 Ford Mustang Cobra 5pc Black Fender, Grille & Rear Trunk Emblems
Daniel Carpenter Reproductions5.0 / 5.0
1 Review
•Brand New•Ford Officially Licensed Products•Kit includes Black Cobra Grille Emblem, Black Cobra Fender Emblems, Black SVT Trunk Emblem, & Blac...
View full details1999-2004 Ford Mustang Seat Release Lever Tilt Latch Handle Knobs Pair
Daniel Carpenter Reproductions•Brand New•Fits ANY 1999-2004 Ford Mustang or Cobra•Direct replacement for factory seat latch•Comes in black•Sold as a Pair, includes both Driver &...
View full details1979-1993 Mustang Male BLACK Seat Belt Holder Sleeves Covers Pair -
Daniel Carpenter Reproductions•Brand New •Fits ANY 1979-1993 Mustang •Sold as a pair •Sleeves for the male seat belt buckle •Mounts behind the seat and holds on seat belt at...
View full details1987-1993 Ford Mustang Black Center Console w/ Brake Boot, Cup Holders & USB
Daniel Carpenter Reproductions•Brand New •Fits ANY 1987-1993 Mustang with or without power mirrors •Includes switch cover for cars without power mirrors •Comes in Black but can ...
View full details1979-1993 Mustang or Cobra Rearview Mirror & Mounting Bracket
Daniel Carpenter Reproductions•Brand New •Daniel Carpenter Reproductions part # E5FZ-17700 •Fits ANY 1979-1993 Ford Mustang or Cobra •Mirror measures 9.5" x 2.5" •Uses articulat...
View full details1982-1993 Ford Mustang Upper & Lower Door Hinge Brackets w/ Pins & Bushings Kit
Daniel Carpenter Reproductions•Brand New •Fits ANY 1982-1993 Mustang •Sold as a kit, includes both upper and lower hinges, 2 hinge pins, & 4 bushings •Can be used on either ...
View full details1985-1986 Mustang GT 8 Piece Body Door Fender Quarter Panel Side Moldings Kit
Daniel Carpenter Reproductions•Brand New •Fits 1985-1986 Mustang GT •High quality reproductions - exactly like original! •All pieces have self-adhesive molding tape for easy and...
View full details1985-1986 Ford Mustang SVO & 1993 Cobra Tail Light Lamp RH Passenger Side
Daniel Carpenter Reproductions•Brand New•Fits ANY 1983-1993 Mustang•Charcoal with charcoal stripes•This is the Passenger Side (RH) Tail Light Lens (lens only, does not include t...
View full details1987-1993 Mustang GT Stock Tail Lights Taillights Lens Lenses Lense NEW Pair
Daniel Carpenter Reproductions• Brand New • Made from the Ford Tooling • You are getting a pair both LH & RH Sides • They do not come painted. • They come us as pictured...
View full details